Trimble TSC3 - Internal Modem Does Not Connect

Trimble TSC3 - Internal Modem Does Not Connect

Problem: TSC3 - Unable to connect and collect points. Collector is able to track satellites and when it tries to connect to the VRS network; instead of saying "welcome to ..." it prompts a message asking to stay on 2G network or auto switch between 2G/3G".

Solution: Reset Collector - Connection Message will go away

• Related Articles

• Trimble Field Link - GNSS Non NTAP Connection

  Trimble Field Link - GNSS Non NTAP Connection Problem: How to connect to a non-HTAP VRS network Solution: TFL and GNSS connections for VRS networks need to connect through non-NTAP connection ports if no username/password is provided for the network. ...

• FieldLink: Data Transfer via Trimble Connect

  FieldLink: Data Transfer via Trimble Connect You can access your project data inside of FieldLink via Trimble Connect as long as you using version 6.0 or higher. See the videos below for other options to access Trimble Connect on your FieldLink ...

• FieldLink: Saving to Trimble Connect Issue

  FieldLink: Saving to Trimble Connect Issue Some FieldLink users are reporting that they are getting an error message stating that their storage is full when saving data from FieldLink to their project on Trimble Connect. Normally the error message ...

• GNSS Network Connection Info

  GNSS Network Connection Info General Troubleshooting In order to connect to the appropriate VRS network for your project please follow the steps recommended below. Mount Point Be sure to check your mount point and that it matches up with the network ...

• Trimble TSC7: Re-Install Operating System

  Trimble TSC7: Re-Install Operating System Problem: Procuedure to reinstall operating system for Trimble TSC7 Solution: Please floolw the stemps to build an image istallation USB key: 1) Prepare an USB Key which the size must be less than 32GB abd us ...