Trimble Field Link - GNSS Non NTAP Connection

Trimble Field Link - GNSS Non NTAP Connection

Problem: How to connect to a non-HTAP VRS network

Solution: TFL and GNSS connections for VRS networks need to connect through non-NTAP connection ports if no username/password is provided for the network. There is no way to uncheck HTAP network within TFL at this time. Contact the VRS network to confirm which port they are using.

• Related Articles

• GNSS Network Connection Info

  GNSS Network Connection Info General Troubleshooting In order to connect to the appropriate VRS network for your project please follow the steps recommended below. Mount Point Be sure to check your mount point and that it matches up with the network ...

• Trimble FieldLink - GNSS Readable Message Types

  Trimble FieldLink - GNSS Readable Message Types Problem: What types of message types does Trimble Field Link Connect to? Solution: TFL is currently tested against the following formats: CMRx CMR+ RTCM 3.1 RTCM2.3"

• Field Points: v8.0 Release Notes

  Field Points: v8.0 Release Notes The PDF included is the latest release notes for v8.0 for Trimble Field Points. Key Updates Version 8.0 is Compatible with Autodesk® AutoCAD® 2021 and Autodesk® Revit® 2021 AutoCAD Compatible Applications Annual ...

• Trimble TSC3 - Internal Modem Does Not Connect

  Trimble TSC3 - Internal Modem Does Not Connect Problem: TSC3 - Unable to connect and collect points. Collector is able to track satellites and when it tries to connect to the VRS network; instead of saying "welcome to ..." it prompts a message asking ...

• Connecting Trimble Field Link To Virtual Layout

  Connecting Trimble Field Link To Virtual Layout Problem: How to Connect Virtual Layout to Trimble Field Link Office. Solution: Virtual Layout HOW-TO Setup and Install 1. Copy the Virtual Layout Folder on to your PC; 2. Make sure your current TFL ...