Trimble Field Link: Setting up on Foil Targets

Trimble Field Link: Setting up on Foil Targets

Problem: How do you set up on reflective foil inside of Trimble Field Link?

Solution: You have to change the prism to the 360 prism and have it in camera mode focused near the foil target. Then leave the camera mode and the robot will center and lock onto the reflective target. Then you can switch to the laser and it should be at the center of the prism. Repeat this process for each foil in the set up.

• Related Articles

• Trimble Field Link Office Creates Unwanted Lines

  Trimble Field Link Office Creates Unwanted Lines Problem: When importing point files into Trimble field link office, the program creates unwanted lines; connecting points. Solution: Follow these steps: Ask Customer to remove all additional monitors ...

• Trimble FieldLink - Units are Incorrect

  Trimble FieldLink - Units are Incorrect Problem: User has CAD and points appear in meters when he wanted imperial. Solution: If a CAD file is imported into Trimble Field Link "unitless" it will assume the units selected in TFL. Have customer export ...

• Trimble FieldLink - GNSS Readable Message Types

  Trimble FieldLink - GNSS Readable Message Types Problem: What types of message types does Trimble Field Link Connect to? Solution: TFL is currently tested against the following formats: CMRx CMR+ RTCM 3.1 RTCM2.3"

• FieldLink: v6.0 Release Notes

  FieldLink: v6.0 Release Notes To see an overview of latest updates in FieldLink, please download the attached release notes.

• FieldLink: v6.3 Release Notes

  FieldLink: v6.3 Release Notes FieldLink v6.3 (2022-05 v6.3.0) has been released and ready to install via Trimble Installation Manager (TIM). Please see the support article about installing updates via TIM if you need help updating FieldLink. Please ...