Connecting to Cellular Broadband

Connecting to Cellular Broadband


Connecting to Cellular Broadband

Below are the steps to connect your tablet to cellular broadband via sim card:

  1. Tap the Wireless network icon in the bottom-right corner of the screen, tap Cellular to turn it on, then
    tap-hold it and tap Go to Settings. (Or, tap windows icon / Settings / Network and Internet / Cellular.)
  2. Under Cellular, select the name of your operator—for example, AT&T.
  3. If you want to connect to this network every time it’s in range, select Connect automatically.
  4. Windows will switch automatically between Wi-Fi and cellular broadband as needed. You might incur extra
    charges if you allow roaming.
  5. Tap Connect.

For additional information please see the Trimble Support Bulleting which contains link to Microsoft technical bulletins.

    • Related Articles

    • RPT: Connecting with FieldLink v5.5

      RPT: Connecting with FieldLink v5.5 Need help connecting to a RPT? Here a video to watch:

    • Nomad: ActiveSync Connection Issues

      Nomad: ActiveSync Connection Issues Problem: Trimble Nomad will not connect to computer to connect to transfer files between computer and/or LM80 Desktop. Solution: Verify ActiveSync / Windows Mobile Device Center is installed on client machine. ...

    • GNSS Network Connection Info

      GNSS Network Connection Info General Troubleshooting In order to connect to the appropriate VRS network for your project please follow the steps recommended below. Mount Point Be sure to check your mount point and that it matches up with the network ...

    • FieldLink: RTS Icon Not Displaying in Connection

      FieldLink: RTS Icon Not Displaying in Connection If you lose the RTS icon on the T100 table please follow the steps below to resolve the issue. Right-click on the Windows All Apps icon (should be in the lower left-hand corner of the screen) Select ...

    • Connecting Trimble Field Link To Virtual Layout

      Connecting Trimble Field Link To Virtual Layout Problem: How to Connect Virtual Layout to Trimble Field Link Office. Solution: Virtual Layout HOW-TO Setup and Install 1. Copy the Virtual Layout Folder on to your PC; 2. Make sure your current TFL ...